Engine - GM (19433063)

Genuine OEM GM Parts & Accessories - 19433063

GMMPN19433063
Sale Price$13,490.74
Save$2,595.2416.1% off
MSRP $16,085.98
Description :

E-ROD SYSTEMS HAVE IT ALL
Each E-ROD crate engine system carries an official California Air Resources Board (CARB) E.O. number and includes complete emissions equipment, along with the engine controller and harness needed to get the engine running. The primary elements of each kit include:

  • Chevrolet Performance crate engine
  • Engine control module
  • Exhaust manifolds
  • Catalytic converters
  • Mass airflow sensor and sensor boss
  • Oxygen sensors and sensor bosses
  • Air filter
  • Accelerator pedal
  • Evaporative emissions canister
  • Instruction manual
E-ROD LT1 6.2L SYSTEM
  • CARB EO#: (PENDING)
  • Horsepower: 455 @ 6,000 rpm
  • Torque: 465 lb.-ft. @ 4,600 rpm
Introduced on the seventh-generation Corvette Stingray and Gen 6 Camaro SS, the LT1 6.2L V-8 opened the next chapter in the long, historic legacy of the Small-Block engine. It is architecturally similar to the LS family of Small-Block engines, but with a unique block casting, cylinder head design, oiling system and more. It also combines advanced technologies including direct injection and continuously variable valve timing to support an advanced combustion system. Chevrolet Performance's new LT1 crate engine - offered with a wet-sump or dry-sump oiling system - and a controller specially designed for retro-fit applications is included. This is the first LT-based E-Rod system and the most technically advanced. It is also available in a Connect & Cruise package with a matched 4L75-E automatic transmission.
INSTALLATION NOTES
Engines shipped with high-pressure direct-injection fuel pump installed
Assembly does not include any electronics
Kit includes electronic throttle pedal, which is required for throttle input to the ECU
Intended for pre-1995 street vehicles or any off-road vehicle
Not intended for marine applications
Front-End Accessory Drive Kit can be ordered separately
8-bolt crankshaft flange
Shipped with 14" flexplate
BUILDER'S NOTE
To facilitate a complete E-ROD installation, the builder will need to source additional components to complete the assembly and get the vehicle running, including:
  • Fuel tank
  • Fuel lines (re-circulating or returnless)
  • Fuel pump - 58 psi (400 kPa) for LC9 and LS3 or 65 psi (450 kPa) for LSA
  • Fuel tank vent line from the tank to the evaporative emissions canister
  • Purge line from the canister to the engine purge solenoid
  • Air induction system that incorporates the mass airflow sensor
  • Exhaust system behind the catalytic converters.
All E-ROD engines require a front-end accessory drive system suitable to the vehicle. The instruction manual included with each kit offers recommendations for the accessory drive kit, as well as the transmission, gear ratios and more. Chevrolet offers several configurations of accessory drive systems to suit different applications; and each allows the installer to easily delete air conditioning.
Chevrolet Performance recommends the LS1 Engine Installation Guide P/N 88959384, which illustrates basic procedures and offers helpful tips on installing an LS engine into older vehicles.
E-ROD systems do not come with a transmission. Chevrolet Performance recommends the SuperMatic(TM) 4L70-E - P/N 19244043 - four-speed automatic overdrive transmission, along with Chevrolet Performance's SuperMatic(TM) transmission controller P/N 19257634, for LC9 and LS3 systems. The LSA, with higher torque output, should use the SuperMatic(TM) 4L85-E, P/N 19300175, along with the SuperMatic(TM) transmission controller, P/N 19302410.
*GM automatic transmissions are typically equipped with 40-tooth reluctor wheels for vehicle speed sensor output. GM late-model manual transmissions are typically equipped with a 17-tooth reluctor wheel. The Chevrolet Performance T56 Super Magnum six-speed manual (P/N 19329795) is equipped with a 40-tooth reluctor wheel.
You May Also Like
Bell Housing Kit LS and LT Engines
$860.52
Clutch Kit LS/LT Engines (8-Bolt Crank)
$1,714.42
LT1 Aluminum Automatic Bell Housing
$176.90

My Location
  • Min. 12 Months
  • Safe, Secure Checkout

Product Details

Description

E-ROD SYSTEMS HAVE IT ALL
Each E-ROD crate engine system carries an official California Air Resources Board (CARB) E.O. number and includes complete emissions equipment, along with the engine controller and harness needed to get the engine running. The primary elements of each kit include:

  • Chevrolet Performance crate engine
  • Engine control module
  • Exhaust manifolds
  • Catalytic converters
  • Mass airflow sensor and sensor boss
  • Oxygen sensors and sensor bosses
  • Air filter
  • Accelerator pedal
  • Evaporative emissions canister
  • Instruction manual
E-ROD LT1 6.2L SYSTEM
  • CARB EO#: (PENDING)
  • Horsepower: 455 @ 6,000 rpm
  • Torque: 465 lb.-ft. @ 4,600 rpm
Introduced on the seventh-generation Corvette Stingray and Gen 6 Camaro SS, the LT1 6.2L V-8 opened the next chapter in the long, historic legacy of the Small-Block engine. It is architecturally similar to the LS family of Small-Block engines, but with a unique block casting, cylinder head design, oiling system and more. It also combines advanced technologies including direct injection and continuously variable valve timing to support an advanced combustion system. Chevrolet Performance's new LT1 crate engine - offered with a wet-sump or dry-sump oiling system - and a controller specially designed for retro-fit applications is included. This is the first LT-based E-Rod system and the most technically advanced. It is also available in a Connect & Cruise package with a matched 4L75-E automatic transmission.
INSTALLATION NOTES
Engines shipped with high-pressure direct-injection fuel pump installed
Assembly does not include any electronics
Kit includes electronic throttle pedal, which is required for throttle input to the ECU
Intended for pre-1995 street vehicles or any off-road vehicle
Not intended for marine applications
Front-End Accessory Drive Kit can be ordered separately
8-bolt crankshaft flange
Shipped with 14" flexplate
BUILDER'S NOTE
To facilitate a complete E-ROD installation, the builder will need to source additional components to complete the assembly and get the vehicle running, including:
  • Fuel tank
  • Fuel lines (re-circulating or returnless)
  • Fuel pump - 58 psi (400 kPa) for LC9 and LS3 or 65 psi (450 kPa) for LSA
  • Fuel tank vent line from the tank to the evaporative emissions canister
  • Purge line from the canister to the engine purge solenoid
  • Air induction system that incorporates the mass airflow sensor
  • Exhaust system behind the catalytic converters.
All E-ROD engines require a front-end accessory drive system suitable to the vehicle. The instruction manual included with each kit offers recommendations for the accessory drive kit, as well as the transmission, gear ratios and more. Chevrolet offers several configurations of accessory drive systems to suit different applications; and each allows the installer to easily delete air conditioning.
Chevrolet Performance recommends the LS1 Engine Installation Guide P/N 88959384, which illustrates basic procedures and offers helpful tips on installing an LS engine into older vehicles.
E-ROD systems do not come with a transmission. Chevrolet Performance recommends the SuperMatic(TM) 4L70-E - P/N 19244043 - four-speed automatic overdrive transmission, along with Chevrolet Performance's SuperMatic(TM) transmission controller P/N 19257634, for LC9 and LS3 systems. The LSA, with higher torque output, should use the SuperMatic(TM) 4L85-E, P/N 19300175, along with the SuperMatic(TM) transmission controller, P/N 19302410.
*GM automatic transmissions are typically equipped with 40-tooth reluctor wheels for vehicle speed sensor output. GM late-model manual transmissions are typically equipped with a 17-tooth reluctor wheel. The Chevrolet Performance T56 Super Magnum six-speed manual (P/N 19329795) is equipped with a 40-tooth reluctor wheel.
You May Also Like
Bell Housing Kit LS and LT Engines
$860.52
Clutch Kit LS/LT Engines (8-Bolt Crank)
$1,714.42
LT1 Aluminum Automatic Bell Housing
$176.90


Part Number (MPN)
19433063
Brand
GM
SKU
19433063
Superseded Part Number(s)
12682080, 19370671, 19418256

YearMakeModelBody & TrimEngine & Transmission
Vehicle #1
Year
Make
Model
Body & Trim
Engine & Transmission

Shipping Policy

  • In stock orders ship within 24 hours.
  • Weekend orders will be processed the next business day.
  • A VIN Number and/or RH, LH, or option verification are required on all purchases.
  • If the VIN# and/or RH, LH, or option verification is not provided, we will attempt to reach out to the customer for that information. If we do not hear from the customer within 7 days, the order will be processed and shipped. NO REFUND!
  • If a part is not in stock and must be ordered from the manufacturer, it usually takes 2-3 days to arrive to us and will be promptly shipped to you. Most of the orders are shipped complete within 2-3 business days. A few of the parts ordered from the manufacturer may take up to 5-6 business days to arrive and will shipped to you immediately.
  • Depending upon location, ground shipments usually take 2-7 days.
  • Oversized shipments will be additional; you will be contacted prior to shipping for approval.
  • We cannot guarantee transit times for ground and oversize orders.
  • Shipping Carrier substitutions may be made at our determination in an attempt to reduce shipping cost to the customer.
  • We do not ship internationally.
  • In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.
  • We do not ship COD orders.
Check out our Shipping Policy for more details.

Return Policy


Within 14 business days of receiving your order from OEMPartsQuick.com, you may return any CORE parts or incorrect parts.

All core/incorrect parts must be in their original condition and packaging, and cannot be installed, disassembled or damaged by incorrect installation. Items that do not meet this criteria will be returned to you and you will charged for return shipping. All parts that have been installed are not returnable. Shipping charges are non refundable. Any part that is returned without approval will be charged a 25% restocking fee.

If the item is incorrect due to your error such as, looked up the wrong part, inserted the wrong part number or did not provide us with your VIN number during checkout, are not refundable, no exceptions.

A VIN Number and/or RH, LH, or option verification are required on all purchases. If the VIN# and/or RH, LH, or option verification is not provided, we will attempt to reach out to the customer for that information. If we do not hear from the customer within 7 days, the order will be processed and shipped. NO RETURNS, NO REFUND, NO EXCEPTIONS!

If the incorrect part is sent to you due to our error, we will issue a CALL TAG with our freight company and send out the correct part. Any orders refused and returned at time of delivery without an approved RA# number will be charged a 25% restocking charge on entire order. No shipping charges will be refunded and you will incur return shipping charges. We are not responsible for any installation errors, labor or towing expenses, or rental car expenses that occur as the result of the installation of any wrong or defective parts.

Service manuals, owner manuals, CD ROMs, special-order products, and sheet metal parts are not returnable for any reason. No refunds on electrical or glass parts (i.e. windshields, door glass etc.)

All parts approved for return must be received by us with all correct information and RGA number issued by OEMPartsQuick.com within 14 days of purchase date or the return will be cancelled and no credit will be issued.

Damaged and/or Missing Items

The carrier is responsible for all items damaged during shipping. In the instance that you receive a damaged part you must call OEMPartsQuick.com customer service at 1-888-743-9375 and state such, as well as file a claim with UPS at 1-800-PICK-UPS. This must be done within 24 hours of receiving your shipment. Once the damaged part has been returned for inspection, we will either credit you or send you a replacement part of your choice.

Missing items must be reported to both OEMPartsQuick.com via the contact page and UPS withing 24 hours of receiving the package.

Return Procedures for Approved Returns

To return incorrect parts or cores, please login to your account, go to the order status page, and then click on the order ID number. Click the return button under the item(s) you would like to return.

Once you have submitted a request to return an item, it will take 1-3 business days on average for you to receive an RA number, which allows the item to be returned to us. All returns must be submitted within 14 days of the date the order was received. All parts must be returned to within 14 days from the purchase date or the return will not be accepted. You will not be able to submit returns after that time period.

We need your order number, name, email address and the part number/core you wish to return, along with a explanation of why you need to return it. If you do not have your order number, please indicate when your order was placed and the full name used. All RA numbers are e-mailed in 1-3 business days with a return shipping address. No returns will be accepted without an RA number. The RA number must be written on the outside of the shipping box or the package(s) will be returned to you.

All returns must be postage paid. Return freight charges are not refundable. All returns must be packaged properly; we are not responsible for damaged returns that occur as a result of improper packing.

Core Returns

All core returns must be returned within 14 days from date you receive your order.

All core returns must be returned in the Manufacturers package the remanufactured part was received in, with all the original Manufacturer stickers on the part. The core must not have any external damage and the Manufacturer's box must not have any writing on the outside.

Do not use the Manufacturer's box as a shipping box — it must be packaged inside a shipping box. Any damage to the part or box may cause the core to be rejected. We do not accept aftermarket or non-oem parts for core returns.

Warranties

OEM Manufacturers warrant that they will either provide a replacement part or repair any OEM part or accessory that is defective in material or workmanship. This warranty applies to new or remanufactured parts that are genuine or authorized OEM parts. Except for part listed below, this warranty is good for 12 months, regardless of mileage, from the date of purchase.

The Limited Warranty on OEM Parts and Accessories does not cover:

Normal maintenance service and parts replacement as outlined in the maintenance. Damages or failures resulting from: Misuse (your Owner's Manual is your guide to proper use). Accident. Modification or improper use. Use of a non-genuine or unauthorized OEM part. To the extent allowed by State Law, incidental or consequential damages such as loss of vehicle, inconvenience or commercial loss. Obtaining Warranty Service

In order to obtain warranty service, you must deliver the warranted part or accessory to an authorized dealer at your expense with proof of purchase. If an authorized Toyota dealer did not originally install the part or accessory on your vehicle, you will be required to remove the part or accessory or pay for the item or accessory to be removed and replaced.

You also have the option of returning the part or accessory to OEMPartsQuick.com. If a replacement part cannot be obtained, a full refund (for the cost of the part only) will be issued to the original purchaser. Any refunds or exchanges must be accompanied by the original sales invoice.

Warranties are limited to the original purchaser and are non-transferable. Under no circumstances will our liability exceed the amount of the original sale.

The warranty does not cover freight charges. You will need to obtain an RGA number prior to return. NO return will be accepted without an RGA number. Furthermore, freight charges are the responsibility of the purchaser.

All returns must be shipped to:

OEMPartsQuick.com

ATTN: Tausha: OEM Parts Dept. 900 E State St. Athens, OH 45701 OEMPartsQuick.com is not responsible for lost, stolen or damaged packages. All claims for such must be processed through UPS.

Check out our Return Policy for more details.

GM

Built with GM’s engineering expertise, ACDelco and OEM GM parts are factory original equipment replacement parts for your Chevy, Buick, Cadillac, GMC, Saturn, Pontiac, Oldsmobile or Hummer. Every ACDelco and OEM GM part is rigidly held to federal safety and quality standards and is guaranteed by GM Replacement Parts Limited Warranty. You can trust GM Genuine Parts when ordering this Engine for your vehicle. GM Parts & Accessories Limited Warranty.
Shop by GM Make / Model

OEMPARTSQUICK.COM

OEMPartsQuick.com was designed to offer a convenient OEM Parts website, backed by the security of an authorized franchised dealer. You can feel comfortable knowing you purchased your parts at a wholesale price, with fast and efficient shipping. Choose from Toyota, Scion, Ford, Lincoln, Hyundai & GM Parts ( Chevy, Buick, Cadillac, GMC, ETC).

" "